{"product_id":"temperature-probe","title":"Temperature Probe for Blue Myco B-310L, B-550L \u0026 B-1180L Sterilizers","description":"\u003cp\u003eReplacement temperature probe for the Blue Myco B-310L, B-550L and B-1180L commercial sterilizers.\u003c\/p\u003e\u003cp\u003eThe probe mounts either on the back of the dome lid or on the underside of the vessel, and feeds the PID controller its digital temperature readout. Everything the controller does — holding set point, running the insulation timer, cutting the elements — depends on what this probe reports. A drifting probe means the chamber is not where the display says it is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplace the probe if:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe actual temperature reads well off the set value during a cycle\u003c\/li\u003e\n\u003cli\u003eThe readout jumps, freezes or drops out\u003c\/li\u003e\n\u003cli\u003eThe wiring or connector is damaged or heat-degraded\u003c\/li\u003e\n\u003cli\u003eRecalibration no longer brings the reading back into line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstallation tip:\u003c\/strong\u003e protect the wiring with heat-shrink tubing and heat-proof thermal tape. Heat cycling at the connection is what kills most probes, and a few minutes of protection at install adds years of service.\u003c\/p\u003e\u003cp\u003eInspect and clean the probe periodically — sediment build-up on the tip will skew readings before the probe itself fails.\u003c\/p\u003e","brand":"Blue Myco MFG","offers":[{"title":"Default Title","offer_id":46956818366692,"sku":"TMP-PBE","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0735\/9325\/8212\/files\/temp_probe_blue_myco.jpg?v=1789818248","url":"https:\/\/www.bluemycomfg.com\/products\/temperature-probe","provider":"Blue Myco MFG","version":"1.0","type":"link"}